ArtCase Overview
Designed to allow varying sizes and shapes of unfinished or delicate artwork to be safely transported and stored, ArtCase was the original CarriArt product, introduced in 2014
In outline
ArtCase consisted of a carrier combined with a set of holders.
Available as ArtCase A2 and ArtCase A3, each accommodated a canvas up to the corresponding ISO size, or multiple smaller pieces of artwork if needed.
The holders were placed around the artwork and fixed in place against the carrier with adhesive pads, preventing the artwork from moving or being damaged.
The carriers and the holders were made of lightweight white corrugated polypropylene.
A case of a carrier
From the outset, the ArtCase carrier was designed to be simply a box with a lid, so once the artwork was in place within the carrier, the lid closed snugly over it.
The wrap-around flap built into the lid passed over the handle and was secured to the carrier using hook & loop coins.
An optional shoulder strap supplemented the handle, making it easy to carry.
Holder holding tight
ArtCase used a set of four angled holders to hold a piece of artwork in place, one fitted against each edge.
The sloping side of each holder projected over the artwork, so the only contact was with the very outside edge of the item and ensuring that art media of varying thicknesses could be accommodated – from card, through to a box canvas.
It is the holders that make CarriArt products unique.
Firm and yet moveable
ArtCase holders were fixed in place using specially selected adhesive foam pads.
The adhesive pads were sufficiently sticky to keep the holders and artwork in place – however, the holders could still be removed and relocated, allowing their position to be adapted to the size and shape of the artwork.
In addition, the adhesive pads could be used more than once; and when they did start to lose their adhesive property, they could easily be replaced.
