About CarriArt
Hi, Doug here – founder of CarriArt. Here’s some background on CarriArt and me, in case you are interested …
Origins
Having dabbled in art of various forms for a number of years, in 2013 I started painting in oils. Previously, transporting drawings and acrylic paintings back from holidays had occasionally proved difficult, but typically the work was dry by the time came for the journey home. Bringing oil paintings home presented a whole other challenge – how do you stop artwork that is still wet from getting damaged while in transit?
I attended a course given by Roy Lang in 2013, and only rather vague advice was provided by the training centre about how to get the completed study home. Reading their advice, I was not entirely sure what represented a “suitable cardboard box”. Mine ended up angled across a box I found going spare at work, and as a result the painting from the course still carries some of the marks it picked up while lodged in the back of my car. One of the attendees with greater experience of such situations turned up with a large pizza box, which seemed like a better idea.
While on a holiday in Scotland later that year I painted a landscape of the local loch and mountains. I had taken a pizza box with me, but when I tried to pack the painting away it soon became apparent that such an arrangement was woefully inadequate. The painting was free to slide around, and even with the box packed horizontally the motion of the car caused the painting to bounce up the inside top of the box when in transit. And that was just a small painting – how do you find a pizza box big enough for a 12×16” board or canvas?
Research through various art materials catalogues failed to reveal a suitable solution. Regular portfolio? Probably fine if your painting is dry or the surface won’t be damaged by being in contact with a flat surface. Pochade box? Possibly acceptable if you are painting small canvases of a given size. What I really needed was a something that could safely carry a painting on either a canvas or a canvas board, while accommodating a variery of different sizes of canvas or board.
My experiences set me to thinking about how to solve the problem, which eventually led to the design of the CarriArt holders, with their distinctive sloping front. Combine them with the pizza box idea and you can see how the ArtCase product started to come about.
And ArtCase worked well – it was a usable, innovative solution. I sold around a 1000 and received many favourable reviews (along with the occasional less positive one). There were a few design concerns, for example, the rather flappy nature of the lid (emphasised by the pure size of the lid on ArtCase A2), the rather primitive slots needed to assemble the carrier, the slightly fragile nature of the holders.
So, I looked at various other options, starting before the Covid-19 lockdown, then running into it, and eventually beyond it. I felt the product needed to be a little more solid, and easier to use – so for a while out went corrugated polypropylene and in came the flat version (more dense, nicer finish but less rigid and more fragile). At one point I thought I was there, with a design made up of a flat board on which the artwork sat, along with a case that accommodated the board, which even got as far a pilot production run. Yet it wasn’t quite there – partially because the adhesive pads didn’t stick quite so well to the solid polypropylene sheet. Then I looked at building a holder into the board, which in turn led to the ‘tray’ approach. It then became possible to convert the case into something which slipped over the board, and eventually I ended up with what became WorkShield.
All I need to do among all this is find some time to get back to painting …
Timeline
- 2013: Original idea for the holders identified while on holiday in Scotland. Detailed design work for ArtCase started.
- 2014: Initial prototypes of ArtCase produced, working in association with several potential suppliers. ArtCase A2 production run.
- 2015: ArtCase A3 commissioned, following customer feedback requesting a smaller, less unwieldly case.
- 2016: Peak of ArtCase sales.
- 2018: ArtCase A3 sells out
- 2019: Holders sell out, ending ArtCase sales (other accessories remain available). Research begins into developing the design beyond ArtCase.
- 2020: Following several months of design work, a sample run of a possible product is abandoned when it turns out the board is too small!
- 2022: Having finalised the design for WorkShield, my supplier goes into liquidation just as production is about to begin, (thankfully I hadn’t paid them too much money!). The quest to find a new manufacturer begins again …
- 2023: WorkShield 4000 finally nakes it to market!
With thanks to ...
Design input has been provided by a number of designers, both from current manufacturers and those who worked on prototypes which didn’t make it to the final product. I am grateful to them all.
With respect to ArtCase, I clearly owe a significant debt to whoever invented the pizza box (though to be fair, I did take it further than that).
Carol Archdale (the second person ever to purchase ArtCase) has provided provided invaluable feedback on both ArtCase and during the subsequent redesign process. I am also indebted to Carol Petersen for her thoughts and wisdom. A thank you also, to the multiple others who have provided feedback.
Before they sadly went into liquidation in late 2022, Samantha Trower and the rest of the team at Ambroplastics provided invaluable input into the design of WorkShield (and a couple of blind alleys which preceded it).
GWP have provided support and guidance throughout 2023, helping to bring WorkShield to production. Steve on the design team contributed to improving the looks and rigidity of the WorkHolders. My thanks to also to Brenda Plinta for her endless patience.
Finally, my ongoing thanks and love to my wonderful wife, Yvette, for her endless support, input and assistance.
Doug's gallery
Partially to show I really do paint and partially for vanity, here’s a gallery of some of my artwork. (If they start appearing in the Store you will know CarriArt products are not selling well!) Also, some of my design work can be found on the Abstract…ish website (https://abstractish.teemill.com).














